
Add To Cart
share
Sick WL23-2P2460 Overview
Photoelectric reflex switch WL23-2P2460 red light with Pin Point LED, PNP, plug M12, 4 pins
Sick WL23-2P2460 Description
- Two variants available: without sensitivity adjustment or with teach button
- Polarizing filter ensures reliable detection, even with shiny targets
- Model with PinPoint for intense, consistent red light spot
- 360 visibility of indicating LEDs
- Adjustability removed to prevent operator tampering and to reduce downtime
- Model with teach-in pushbutton enables quick setup
- Durable housing with reinforced mounting holes withstands harsh conditions
- 360 LEDs provide device status indication from multiple angles
- Polarizing filter ensures reliable detection, even with shiny targets
- Less downtime due to ASIC chip technology by SICK
- High level of mechanical and electronic reliability in industrial environments
Your benefits
Features | |
Dimensions (W x H x D):: | 24.6 mm x 80.6 mm x 54 mm |
Sensing range max.: | 0.1 m ... 12 m 1) |
Sensing range: | 0.3 m ... 9 m 2) |
Housing desig (light emission): | Cuboid |
Light source: | PinPoint LED 3) |
Type of light: | visible red light |
Wave length: | 660 nm |
Sensor/detection principle: | Photoelectric retro-reflective sensor |
Light spot (distance): | 45 mm (2.7 m) |
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | ≤ 5 Vpp 2) |
Power consumption: | ≤ 35 mA 3) |
Switching output: | PNP, light/dark-switching, Complementary |
Output current Imax.: | ≤ 100 mA |
Response time: | ≤ 2.5 ms 4) |
Switching frequency: | 200 Hz 5) |
Connection type: | Connector M12, 4-pin |
Protection class: | II 6) |
Circuit protection: | A C D 7) 8) 9) |
Weight: | 100 g |
Housing material: | ABS |
Optics material: | PMMA |
Ambient temperature, operation: | -30 C ... 60 C |
Ambient temperature, storage: | -40 C ... 70 C |
Polarisation filter: | ![]() |
Signal voltage PNP HIGH / LOW: | approx. VS - 2.5 V / 0 V |
Special device: | - |
Angle of dispersion: | 1.5 |
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Reference voltage 50 V DC 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected |