
Add To Cart
share
Sick WL24-2V240S03 Description
- Metal housing that has been IP 69k tested
- Switch selectable PNP or NPN output
- Switch selectable Light or Dark operating mode
- Variants with DC voltage and universal AC/DC voltage with UL approval
- Optional test input, adjustable ON and OFF time delays, alarm output and front screen heating
- M12 or terminal chamber connection: 90 rotatable
- Metal housing that has been IP 69K tested provides reliability and a long service life
- High operating reserve at a long sensing range reduces downtime
- Alarm output signals marginal operation to provide an early warning
- Test input provides diagnostic feedback for example misalignment
- Selectable output type, operating mode, and adjustable time delays makes integration easier and reduce the number of devices needed
- Ensuring reliable operation in environments with temperatures fluctuation due to standard or high-power front lens heating (prevention and reduction of condensation water on the front lens)
- Variants with DC voltage and universal AC/DC voltage provide installation flexibility
- Red light provides easy alignment, which saves time
Your benefits
Features | |
Dimensions (W x H x D):: | 27 mm x 87.5 mm x 65 mm |
Sensing range max.: | 0 m ... 22 m 1) |
Sensing range: | 0 mm ... 15 mm 2) |
Housing desig (light emission): | Cuboid |
Light source: | LED 3) |
Type of light: | visible red light |
Sensitivity adjustment: | Sensitivity adjustment |
Delay time: | Adjustable via time delay selector switch: 0.5 ... 10 s |
Time type: | Switch on delay time delay off |
Sensor/detection principle: | Photoelectric retro-reflective sensor |
Light spot (distance): | 250 mm (15 m) |
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C | |
Mechanics/electronics | |
Enclosure rating: | IP 67 |
Supply voltage: | 10 V DC ... 30 V DC 1) |
Residual ripple: | < 5 Vpp 2) |
Power consumption: | ≤ 150 mA 3) |
Switching output: | NPN, light/dark-switching, selectable via NPN/PNP selector PNP, light/dark-switching, selectable via light/dark selector |
Output current Imax.: | 100 mA |
Response time: | ≤ 500 s 4) |
Switching frequency: | 1,000 Hz 5) |
Electrical connection: | Terminal connection with M16 gland 6) |
Protection class: | II 7) |
Circuit protection: | A C D 8) 9) 10) |
Weight: | 330 g |
Housing material: | Zinc diecast |
Optics material: | glass |
Ambient temperature, operation: | -40 C ... 60 C |
Ambient temperature, storage: | -40 C ... 75 C |
Test input sender off: | TE to 0 V |
Polarisation filter: | ![]() |
Special device: | ![]() |
Special features: | dynamic front lense heating, front lense made of glass |
Front screen heating: | ![]() |
1) Limit values 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Connection rotable by 90 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) C = interference suppression 10) D = outputs overcurrent and short-circuit protected |