f Sick WL27-302630S12 (1045988)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WL27-302630S12 (1045988)

Add To Cart
share


Sick WL27-302630S12 Overview



REF.PHOTOELEC.SWITCH

Sick WL27-302630S12 Description



  • High scanning range, high operating reserves
  • Faster alignment with red light
  • Reliable operation in industrial environments and when devices are mounted opposite one another
  • Front screen heating, time functions
  • Operating temperature: -40 C - +60 C
  • UL approval
  • Your benefits

  • Less downtime plus resistance to contamination due to high operating reserves
  • Flexible usage due to extended functionality e.g. time functions
  • Extremely vibration resistant and therefore largely independent of ambient conditions
  • For use at temperatures as low as 40 C
  • Highly stable housing due to offset fixing holes

Features
Dimensions (W x H x D)::24.6 mm x 80.6 mm x 54 mm
Sensing range max.: 0.1 m ... 1.8 m 1)
Sensing range: 0.1 mm ... 700 mm 2)
Light source:LED 3)
Type of light:visible red light
Wave length:660 nm
Light spot diameter (distance):10 mm (400 m)
Adjustment:no/fix
Sensitivity adjustment:No/fix
1) 2) PL30A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 65
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 45 mA 3)
Switching output:relay, light switching, selectable via time delay selector switch, change-over contacts, electrically isolated 4)
Response time:≤ 3 ms 5)
Switching frequency:200 Hz with light/dark ratio 1:1
Connection type:Connector Q6, 6-pin, AC/UC-coding
Number of cores:6
Protection class:

II

6)
Circuit protection:A
C
7) 8)
Weight:120 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-40 C ... 60 C
Ambient temperature, storage:-40 C ... 75 C
Polarisation filter:
Special device:
Angle of dispersion:1.5
Special features:with semiconductor relay 24 VDC, supply voltage 24 ... 120 V DC
Switching current (switching voltage):0.1 (30)
0.1 (20)
Usage category:AC-15, DC-13, according to EN 60947-1
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Provide suitable spark supression for inductive or capacitive loads 5) Signal transit time with resistive load 6) Reference voltage 50 V DC 7) A = VS connections reverse-polarity protected 8) C = interference suppression


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: