f Sick WLG4S-3N3432 (1052210)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WLG4S-3N3432 (1052210)

Add To Cart
share






Sick WLG4S-3N3432 Description



  • Continuous adaptation of the switching threshold when there is soiling
  • Temperature compensation for stable working point
  • Small, highly visible, sharply defined light spot
  • Detection of glass with damping > 8%
  • Teach-in function for fast and simple commissioning
  • Your benefits

  • The all-around carefree package provides "best-in-glass" performance since all known transparent objects can be reliably detected
  • Less downtime due to reliability of usage under changing environmental conditions - temperature, dust and drift effects are continually compensated by the adapting switching threshold.
  • Simple and fast setting with a single press of the teach-in button

Features
Dimensions (W x H x D)::16 mm x 39.5 mm x 12 mm
Sensing range max.: 0.01 m ... 5 m 1)
Sensing range: 0 m ... 3 m 2)
Housing desig (light emission):Cuboid, Slim
Light source:PinPoint LED 3)
Type of light:visible red light
Wave length:650 nm
Adjustment:adjustable
Sensitivity adjustment:Teach
Cable
Teach-in:single
Sensor/detection principle:Photoelectric retro-reflective sensor, autocollimation
Light spot (distance):45 mm (1.5 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
IP 66
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:< 5 Vpp 2)
Power consumption:≤ 20 mA 3)
Switching output:PNP, light/dark-switching, Complementary
Output current Imax.:≤ 100 mA
Response time:< 0.5 ms 4)
Switching frequency:1,000 Hz 5)
Connection type:Cable with plug, M12, 4-pin, 150 mm 6)
Cable material:PVC
Conductor cross-section:0.14 mm2
Cable diameter:3.4 mm
Protection class:III
Circuit protection:A
C
D 7) 8) 9)
Weight:30 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-40 C ... 60 C
Ambient temperature, storage:-40 C ... 75 C
Polarisation filter:
Angle of reception:30
Attenuation along light beam:> 8 %
Special Design:for transparent objects
1) Limit values 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) A = VS connections reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: