Sick WLG4S-3P3232H (1048120)- A&S Automation Co., Ltd

Home / Sensors / Sick Sensor / Sick WLG4S-3P3232H (1048120)

Add To Cart

REF.PHOTOELEC.SWITCH

Your benefits

Less machine downtime due to a long-life sensor, which resists the harshest conditions
No restrictions in choice of cleaning procedures
Reliable detection of all objects in the pharmaceuticals and food and beverage sectors
Adjustment via a new revolutionary teach-in button consisting of a shrink-wrapped stainless steel membrane
Simple and fast cable-based setting also possible via teach cable or IO-Link, e.g., if the sensor is installed so that it is inaccessible or is located in an aseptic flow box
Simple and fast alignment due to highly visible PinPoint light spot
Monitoring via IO-Link
Economical machine design - sensor can be used in process without any cables, joints, mounting brackets or fixing holes. This results in an exceptional design that is, at the same time, extremely hygienic

Features
Dimensions (W x H x D)::	15.3 mm x 48.5 mm x 22.3 mm
Sensing range max.:	0 m ... 5 m ¹⁾
Sensing range:	0 m ... 3 m ²⁾
Housing desig (light emission):	Slim
Light source:	PinPoint LED ³⁾
Type of light:	visible red light
Wave length:	650 nm
Adjustment:	adjustable
Sensitivity adjustment:	Teach
Teach-in:	single
Sensor/detection principle:	Photoelectric retro-reflective sensor, autocollimation
Light spot (distance):	45 mm (1.5 m)
¹⁾ ²⁾ PL80A ³⁾ Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:	IP 66 IP 67 IP 69K
Supply voltage:	10 V DC ... 30 V DC ¹⁾
Residual ripple:	5 Vpp ²⁾
Power consumption:	30 ³⁾
Switching output:	PNP, light/dark-switching
Output current Imax.:	100
Response time:	0.5 ms ⁴⁾
Switching frequency:	1,000 with light/dark ratio 1:1
Connection type:	Cable with plug, M8, 4-pin 150 mm ⁵⁾
Cable material:	PVC
Protection class:	III
Circuit protection:	A B C
Weight:	40 g
Housing material:	Edelstahl 316L
Ambient temperature, operation:	-30 C ... 70 C
Ambient temperature, storage:	-30 C ... 75 C
Polarisation filter:
Special Design:	for transparent objects
¹⁾ Limit values, operation in short-circuit protected network max. 8 A ²⁾ May not exceed or fall short of V_S ³⁾ Without load ⁴⁾ Signal transit time with resistive load ⁵⁾ Do not bend below 0 C

Hot Products

Reviews(0)

Write a Review

Hot Products