f Sick WLG4S-3P3434 (1046819)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WLG4S-3P3434 (1046819)

Add To Cart
share






Sick WLG4S-3P3434 Description



  • Continuous adaptation of the switching threshold when there is soiling
  • Temperature compensation for stable working point
  • Small, highly visible, sharply defined light spot
  • Detection of glass with damping > 8%
  • Teach-in function for fast and simple commissioning
  • Your benefits

  • The all-around carefree package provides "best-in-glass" performance since all known transparent objects can be reliably detected
  • Less downtime due to reliability of usage under changing environmental conditions - temperature, dust and drift effects are continually compensated by the adapting switching threshold.
  • Simple and fast setting with a single press of the teach-in button

Features
Dimensions (W x H x D)::16 mm x 39.5 mm x 12 mm
Sensing range max.: 0.01 m ... 5 m 1)
Sensing range: 0 m ... 3 m 2)
Housing desig (light emission):Slim
Light source:PinPoint LED 3)
Type of light:visible red light
Wave length:650 nm
Adjustment:adjustable
Sensitivity adjustment:Adjustable Teach
Cable
Teach-in:single
Sensor/detection principle:Photoelectric retro-reflective sensor, autocollimation
Light spot (distance):45 mm (1.5 m)
1) 2) PL80A 3) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
IP 66
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:< 5 Vpp 2)
Power consumption:≤ 20 mA 3)
Switching output:PNP, light switching
Output current Imax.:≤ 100 mA
Response time:< 0.5 ms 4)
Switching frequency:1,000 Hz With light/dark ratio 1:1
Connection type:Cable with plug, M12, 4-pin 150 mm 5)
Cable material:PVC
Conductor cross-section:0.14 mm2
Cable diameter:3.4 mm
Protection class:III
Circuit protection:A
C
D 6) 7) 8)
Weight:30 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-40 C ... 60 C
Ambient temperature, storage:-40 C ... 75 C
Polarisation filter:
Angle of reception:30
Attenuation along light beam:> 8 %
Special Design:for transparent objects
1) Limit values 2) May not exceed or fall short of VS tolerances 3) Without load 4) Signal transit time with resistive load 5) Do not bend below 0 C 6) A = VS connections reverse-polarity protected 7) C = interference suppression 8) D = outputs overcurrent and short-circuit protected


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: