f Sick WTE15-A1111 (1046277)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Sick WTE15-A1111 (1046277)

Add To Cart
share






Sick WTE15-A1111 Overview



Photoelectric proximity switch energetic bipolar

Sick WTE15-A1111 Description



  • Energetic photoelectric sensor in hybrid design with 350 mm sensing distance
  • M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes
  • Flush mounting possible using the snap ring
  • Transparent back cover
  • IR LED emitter
  • Your benefits

  • Compatible with many competitor models, making it easy to install and commission
  • Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections
  • Clearly visible LED indicators reduce setup time and simplify troubleshooting
  • IR LED emitter provides a long sensing range

Features
Dimensions (W x H x D)::16.2 mm x 48.5 mm x 31.9 mm
Sensing range max.: 10 mm ... 350 mm 1)
Sensing range: 10 mm ... 250 mm
Housing desig (light emission):Hybrid
Light source:LED 2)
Type of light:Infrared light
Wave length:950 nm
Thread diameter (housing):M18 x 1
Adjustment of operating distance:potentiometer, 5-turn
Sensor/detection principle:Photoelectric proximity sensor, energetic
Light spot (distance):50 mm (350 mm)
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life 100,000 h at Ta = +25 C
Mechanics/electronics
Enclosure rating:IP 67
Supply voltage:10 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 30 mA 3)
Switching output:PNP, Dark-switching
NPN, Dark-switching
Output current Imax.:≤ 100 mA
Response time:≤ 1.25 ms 4)
Switching frequency:400 Hz 5)
Connection type:Cable, 4-wire, 2 m 6)
Cable material:PUR
Conductor cross-section:0.14 mm2
Protection class:II 7)
Circuit protection:A
B
D 8) 9) 10)
Weight:20 g
Housing material:ABS
Optics material:PMMA
Ambient temperature, operation:-25 C ... 55 C
Ambient temperature, storage:-25 C ... 70 C
Items supplied:snap-ring and M18 nut
Angle of dispersion:4.5
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 C 7) Reference voltage 50 V DC 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) D = outputs overcurrent and short-circuit protected




Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: