Add To Cart
share
Sick WTV18-2P420S01 Description
- High-performance background suppression with large sender/receiver distance and special V-optics
- Variants available for smaller and larger scanning distances
- Scanning distance setting via potentiometer
- Connection: M12, 4-pin
- High-performance background suppression with large transmitter/receiver distance and special V-optics for reliable detection
- Particularly suitable for objects with highly reflective surfaces
- Less downtime in industrial environments
Your benefits
| Features | |
| Dimensions (W x H x D):: | 20 mm x 76 mm x 31.5 mm |
| Sensing range max.: | 300 mm ... 1,400 mm 1) |
| Sensing range: | 300 mm ... 1,400 mm 2) |
| Housing desig (light emission): | Slim |
| Light source: | LED 3) |
| Type of light: | Infrared light |
| Wave length: | 586 nm |
| Adjustment: | adjustable |
| Sensitivity adjustment: | Adjustable potentiometer, 9-turn |
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression |
| Light spot (distance): | 8 mm (200 mm) |
| 1) 2) Object with 90 % reflectance (referred to standard white DIN 5033) 3) Average service life 100,000 h at Ta = +25 C | |
| Mechanics/electronics | |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC ... 30 V DC 1) |
| Residual ripple: | < 5 Vpp 2) |
| Power consumption: | 30 mA 3) |
| Switching output: | PNP, light/dark-switching |
| Output current Imax.: | 100 mA |
| Response time: | < 2,000 s 4) |
| Switching frequency: | 250 Hz with light/dark ratio 1:1 |
| Connection type: | Connector M12, 4-pin |
| Circuit protection: | A C D 5) 6) 7) |
| Weight: | 60 g |
| Housing material: | ABS |
| Optics material: | PMMA |
| Ambient temperature, operation: | -25 C ... 60 C |
| Ambient temperature, storage: | -25 C ... 60 C |
| Voltage supply-LED: | ![]() |
| Output state-LED: | ![]() |
| Special device: | ![]() |
| Special features: | V-Optik |
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) 3) Without load 4) Signal transit time with resistive load 5) A = VS connections reverse-polarity protected 6) C = interference suppression 7) D = outputs overcurrent and short-circuit protected | |
Contact Us
Hot Products