
Add To Cart
share
Metal face
sensor with high-temperature weld slag resistant coating - 2 to 12 mm sensing
range - 8, 12, 18 and 30 mm diameter - Micro DC connector
Stainless steel sensor face and housing withstand
damage from impact, resulting in extended sensor life
High temperature weld slag resistant coating
prevents slag from adhering to sensor
Extended sensing range increases the distance
between the sensor and target
Weld field immune electronics
360 ring LED design indicates power and output
Inductive sensor | ||||||||
Metal thread M30 x 1.5 | ||||||||
Cable with connector | ||||||||
Full metal housing | ||||||||
Increased sensing range | ||||||||
gold-plated contacts | ||||||||
Sensing range 12 mm; [f] flush mountable | ||||||||
Electrical design | DC PNP/NPN | |||||||
Operating voltage [V] | 10...36 DC | |||||||
Protection class | III | |||||||
Reverse polarity protection | yes | |||||||
Output function | normally open | |||||||
Voltage drop [V] | < 4.5 | |||||||
Minimum load current [mA] | 2 | |||||||
Leakage current [mA] | < 0.5 | |||||||
Current rating [mA] | 100 | |||||||
Short-circuit protection | Yes (non-latching) | |||||||
Overload protection | yes | |||||||
Switching frequency [Hz] | 25 | |||||||
Sensing range [mm] | 12 | |||||||
Operating distance [mm] | 0...9.72 | |||||||
Correction factors | mild steel = 1 / stainless steel approx. 0.7 / brass approx. 0.6 / aluminium approx. 0.5 / copper approx. 0.1 | |||||||
Hysteresis [% of Sr] | 1...20 | |||||||
Ambient temperature [C] | -25...70 | |||||||
Protection | IP 67 | |||||||
EMC |
|