OPTEX Photoelectric Sensors E Series
Feature:
?Super Side-sense Type projects the beam from the 5mm(0.19 inch) of wide edge of the sensor.
?M8 pig-tail connector types are available for all models.
?Tough mechanics. 100G Shock Resistance and IP67 Water tightness.
?Easily visible indicator LED can be seen even from the back.
Application:
E series can be installed at very narrow space because of its thin dimensions.
For example, it's good for semiconductor industry which has limited space for sensors.
Easily installed into limited space due to its small size: 3.5mm thick.
Visible red LED makes alignment simple.
Easily installed into limited space due to its small size with M2 screws.
Easily installed into limited space, the narrow beam makes it possible to detect the presence of small screws on the parts feeder.
Model
Diffuse 30mm
Convergent 15mm
Thru-beam 500mm
NPN type
Light ON
2m cable
ED-S30NL
EL-S15NL
ET-S500NL
M8 pigtail - 3pin
ED-S30NL3
EL-S15NL3
ET-S500NL3
M8 pigtail - 4pin
ED-S30NL4
EL-S15NL4
ET-S500NL4
Dark ON
2m cable
ED-S30ND
EL-S15ND
ET-S500ND
M8 pigtail - 3pin
ED-S30ND3
EL-S15ND3
ET-S500ND3
M8 pigtail - 4pin
ED-S30ND4
EL-S15ND4
tT-S500ND4
PNP type
Light ON
2m cable
ED-S30PL
EL-S15PL
ET-S500PL
M8 pigtail - 3pin
ED-S30PL3
EL-S15PL3
ET-S500PL3
M8 pigtail - 4pin
ED-S30NL4
EL-S15NL4
ET-S500PL4
Dark ON
2m cable
ED-S30PD
EL-S15PD
ET-S500PD
M8 pigtail - 3pin
ED-S30ND3
EL-S15ND3
ET-S500ND3
M8 pigtail - 4pin
ED-S30ND4
EL-S15ND4
ET-S500PD4
Supply voltage
DC 12 to 24V 10% Inc. 10% ripple
Power consumption
20mA Max
30mA Max
Sensing distance
30mm
2 - 15mm
500mm
Spot size
?3mm @ 30mm
?2mm @ 15mm
?60mm @ 500mm
Objects
Not restricted
opaque object
Repeat accuracy
+/-0.05mm Max
+/-0.1mm Max
Response time
0.25msec(ET), 0.5msec(ED,EL)
Light souce
Red LED
Hysteresis
10%
Control output
NPN or PNP Open collector, 1.8V -50mA 50mA/DC24V Max
Environmental illuminance Sunlight
10,000 lx Max
Environmental illuminance Incandescent lamp
3,000 lx Max
Operating temp / humidity
?25 up to 55 oC / 35 up to 85%
Storage conditions
?40 up to 70 oC / 35 up to 95%
Noise resistance
EN60947-5-2:1998 (Immunity) EN60947-5-2:1998 (radiation)
Vibration resistance
10 to 55Hz, 1.5mm, X-Y-Z each for 2 hours
Shock resistance
1000m/S2 , X-Y-Z each for 3 times
Protection category
IP67
Warm-up time
100ms
LED Indicator
Green (stable), Orenge (output), Red (Power of emitter : ET type)
Connector and cable
2m cable, ?2.5mm 3 cores (2 cores for emitter) / M8 Pigtail 150 mm
Circuit protection
Over Current, Reverse Polarity, Short Circuit
Material
PC
Conformity
CE
Flat type - Front Sensing
Model | Diffuse 100mm | Convergent 8/15/30mm | Thru-beam 500mm | ||||
---|---|---|---|---|---|---|---|
NPN type | Light ON | 2m cable | ED-100NL | EL-30NL | EL-15NL | EL-08NL | ET-500NL |
M8 pigtail - 3pin | ED-100NL3 | EL-30NL3 | EL-15NL3 | EL-08NL3 | ET-500NL3 | ||
M8 pigtail - 4pin | ED-100NL4 | EL-30NL4 | EL-15NL4 | EL-15NL4 | ET-500NL4 | ||
Dark ON | 2m cable | ED-100ND | EL-30ND | EL-15ND | EL-08ND | ET-500ND | |
M8 pigtail - 3pin | ED-100ND3 | EL-30ND3 | EL-15ND3 | EL-08ND3 | ET-500ND3 | ||
M8 pigtail - 4pin | ED-100ND4 | EL-30ND4 | EL-15ND4 | EL-08ND4 | ET-500ND4 | ||
PNP type | Light ON | 2m cable | ED-100PL | EL-30PL | EL-15PL | EL-08PL | ET-500PL |
M8 pigtail - 3pin | ED-100PL3 | EL-30PL3 | EL-15PL3 | EL-08PL3 | ET-500PL3 | ||
M8 pigtail - 4pin | ED-100PL4 | EL-30PL4 | EL-15PL4 | EL-08PL4 | ET-500PL4 | ||
Dark ON | 2m cable | ED-100PD | EL-30PD | EL-15PD | EL-08PD | ET-500PD | |
M8 pigtail - 3pin | ED-100PD3 | EL-30PD3 | EL-15PD3 | EL-08PD3 | ET-500PD3 | ||
M8 pigtail - 4pin | ED-100PD4 | EL-30PD4 | EL-15PD4 | EL-08PD4 | ET-500PD4 | ||
Supply voltage | DC 12 to 24V 10% Inc. 10% ripple | ||||||
Power consumption | 20mA Max | 30mA Max | |||||
Sensing distance | 100mm | 5 - 30mm | 2 - 15mm | 3 - 8mm | 500mm | ||
Spot size | ?60mm @ 100mm | ?20mm @ 30mm | ?10mm @ 15mm | ?10mm @ 8mm | ?140mm @ 500mm | ||
Objects | Not restricted | ||||||
Response time | 0.5msec Max | ||||||
Hysteresis | White Paper : 10% (EL-08 and EL-15),15%(EL-30 and EL-100) | ||||||
Control output | NPN or PNP Open collector, 50mA Max / 24V DC | ||||||
Environmental illuminance | Sun light:10,000 lux Max,Incandescent lamp:3,000 lux Max | ||||||
Operating temp / humidity | ?25 up to 55 oC / 35 up to 85% | ||||||
Storage temp / humidity | ?40 up to 70 oC / 35 up to 95% | ||||||
Noise resistance | EN60947-5-2:1998 (Immunity) EN60947-5-2:1998 (radiation) | ||||||
Vibration resistance | 10 to 55Hz, 1.5mm, X-Y-Z each for 2 hours | ||||||
Shock resistance | 1000m/S2 , X-Y-Z each for 3 times | ||||||
Protection category | IP67 | ||||||
Warm-up time | 15msec | ||||||
LED Indicator | Green (stable), Orenge (output), Red (Power of emitter : ET type) | ||||||
Operating mode | Light ON / Dark ON selectable | ||||||
Connector and cable | 2m cable, ?2.5mm 3 conductors (2 conductors for emitter) / M8 Pigtail 150 mm | ||||||
Circuit protection | Over Current, Reverse Polarity, Short Circuit | ||||||
Material | PC | ||||||
Conformity | CE |