
Magnetic safety switches are non-contact safety switches. They are equipped with complementary-switching or equivalent-switching contacts that are addressed directly using coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult.
RE11/RE21/RE31
Complementary switching with all types
Block-shaped or cylindrical plastic housing
Response range up to 6 mm
1 NO/1 NC contact
Up to performance level PL e (EN ISO 13849)
Direct connection to safety controller possible
M8 plug connector or connected cable
Actuator with code
Sensor and actuator up to enclosure rating IP 67
RE13/RE23
Equivalent switching with large response range
Block-shaped plastic housing
Response range up to 7 mm for small design, up to 9 mm for standard design
2 N/O contacts
Performance level PL e (EN ISO 13849) in conjunction with suitable safety module
Direct connection to a controller possible
M8 plug connector or connected cable
Actuator with code
RE27
Equivalent switching with LED status indicator
Block-shaped plastic housing
Response range up to 9 mm
3 N/O contacts
Up to performance level PL e (EN ISO 13849)
Direct connection to safety controller possible
M8 plug connector or connected cable
LED status indicator
Actuator with code
RE300
Complementary switching in yellow housing
Block-shaped yellow plastic housing
1 NO/1 NC contact
Response range up to 5 mm
Up to performance level PL e (EN ISO 13849)
Direct connection to safety controller possible
Connected cable
Actuator with code
Sensor and actuator up to enclosure rating IP 67