f Sick FFUS10-1G1IO (6041737)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Flow Sensors / Sick FFUS10-1G1IO (6041737)

Add To Cart
share


Sick FFUS10-1G1IO Overview



ULTRASONIC FLOW METER

Sick FFUS10-1G1IO Description



  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 C, process pressure up to 10 bar
  • High chemical resistance due to seal-free sensor design
  • Large display with membrane keyboard
  • Integrated teaching tube detection
  • Your benefits

  • Reduced maintenance costs
  • Adjustable measuring ranges reduces the number of variants
  • Ability to be used with conductive and non-conductive liquids reduces variants and lowers storage costs
  • Straight measuring tube reduces pressure loss, thus reducing energy costs
  • Sensor without seals increases process reliability and availability
  • Flexible measurement system for all industries

Features
Medium:Fluids
Nominal width measuring tube:NW 10
Process temperature: 0 C ... 80 C
Process pressure:max. 10 bar
EHEDG approval:
Performance
Minimim flow:0.3 l/min
Maximumflow:21 l/min
Inlet zone:10 cm
Outlet zone:0 cm
Conductivity:no limitation
Accuracy of sensor element:2 % (of final value)
Repeatability:≤ 0.5 %
Resolution:0.003 l/min
Mechanical data
Process connection:G 1/2
Wetted parts:PSU
Housing material:PSU
Weight:340 g
Electrical data
Supply voltage:18 V DC ... 30 V DC 1)
Residual ripple:≤ 5 Vpp 2)
Power consumption:≤ 180 mA 3)
Initialization time:≤ 5 s
Protection class:III
Connection type:M12x1, 5-pin
Output signal:Analog output: 4 mA ... 20 mA, 0 mA 20 mA current flow
1 pulse/status output: PNP transistor output for flow rate meter, empty pipe detection, flow monitoring
4)
Impuls/frequency output:0kHz ... 10 kHz
Puls width:≤ 1 s
Signal voltage HIGH:Vs - 2 V
Signal voltage LOW:≤ 2 V
Output current:< 100 mA
Inductive load:1 H
Capacitive load:100 nF
Response time:filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s 5)
Enclosure rating:IP 67
Output load:< 500 Ohm
Lower signal level:3.8 mA ... 4 mA
Upper signal level:20 mA ... 20.5 mA
1) 4) All connections are polarity protected. All outputs are overload and short-circuit protected. 2) May not exceed or fall short of VS tolerances 3) Without load 5) Analog output and display
Ambient data
Ambient temperature, operation:0 C ... 60 C
Ambient temperature, storage:-20 C ... 70 C


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: