f Sick LUT2-2P1116 (1048505)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Luminescence Sensors / Sick LUT2-2P1116 (1048505)

Add To Cart
share


Sick LUT2-2P1116 Overview



LUT2-2P1116 Luminescence Scanner PNP-Switching output Light spot orientation lengthwise, Teach in, Scanning distance 12,5 mm, 4-pin plug M12 without timer

Sick LUT2-2P1116 Description



  • Small plastic housing
  • High system sensitivity
  • Static teach-in on mark and/or background via control panel or control cable
  • Fast switching speed 500 Hz and 2 kHz
  • Your benefits

  • Compact size enables easy integration into any machine
  • Fast and easy setup saves time and money
  • Increased reliability and precision enable fast response time

Features
Dimensions (L x W x H):22 mm x 12 mm x 40 mm
Sensing distance 1):12.5 mm
Operating range:8 mm ... 20 mm
Light source 2) 3):UV-LED
Light emission:long side
Light spot size 4):2 mm x 2.5 mm
Light spot direction:Vertical
Receiving filters:KV 418 (standard)
Receiving range:450 nm ... 750 nm
Adjustment:Static 2-point teach-in
Switching mode 5):Light/dark switching
1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 C 3) Wave length: 370 nm 4) Atsensing distance 5) L/D switchingvia teach-in
Mechanics/electronics
Supply voltage Vs:DC 12 V ... 24 V
Residual ripple 1):≤ 5 Vpp
Power consumption 2):≤ 30 mA
Switching frequency 3):500 Hz / 2 kHz, depending on the mark intensity
Response time 4):1 ms / 250 s
Switching output:PNP: HIGH = VS-≤ 2 V / LOWapprox. 0 V
Switching output:PNP
Output current Imax.:≤ 100 mA
Input, teach-in (ET):PNP:
Teach: U= 10 V... < UV
Run: U < 2 V
Connection type:Connector M12, 4-pin
Protection class 5):II
Circuit protection:Output Q short-circuit protected
Interference suppression
VS connections reverse-polarity protected
Enclosure rating:IP 67
Weight:ca. 11 g
Housing material:ABS
1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Signal transit time with resistive load 5) Reference voltage 50 V DC Limit values: DC 12 V (-10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A
Ambient data
Ambient temperature:Operation: -10 ... 55 C
Storage: -25 ... 75 C
Shock load:according to IEC 60068


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: