f Sick LUT3-851 (1012870)- A&S Automation Co., Ltd
 
Home / Sensors / Sick Sensor / Luminescence Sensors / Sick LUT3-851 (1012870)

Add To Cart
share


Sick LUT3-851 Overview



Luminescense Scanner LUT3-851 NPN,PNP switching output, scanning distance 50 mm off-delay, analogue output plug M 12, 5pin filter og570

Sick LUT3-851 Description



  • Scanning distance selectable by using interchangeable lenses (10 ... 90 mm)
  • Fibre-optic cable connection
  • Analogue output
  • Additional optical filter
  • The relatively sensitivity has to be checked (akin)

Features
Dimensions (L x W x H):80 mm x 30.4 mm x 53 mm
Sensing distance 1):50 mm
Light source 2) 3):UV-LED
Light spot size:5 mm x 15 mm
Receiving filters:OG 570
Receiving range:570 nm ... 750 nm
Adjustment:Manual (potentiometer)
Switching mode:Light switching
1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 C 3) Wave length: 375 nm
Mechanics/electronics
Supply voltage Vs:DC 12 V ... 30 V
Residual ripple 1):< 2 Vpp
Power consumption 2):< 60 mA
Switching frequency 3):1.5 kHz
Response time 4):350 s
Switching output:PNP: HIGH = VS-≤3 V / LOW = approx. 0 V
NPN: HIGH = approx.VS/ LOW ≤ 2 V
Switching output:PNP/NPN
Output current Imax.:100 mA
Connection type:Connector M12, 5-pin
Protection class 5):

II

Circuit protection:Output Q short-circuit protected
Interference suppression
VS connections reverse-polarity protected
Enclosure rating:IP 67
Weight:Ca. 400 g
Housing material:Die-cast zinc
1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Signal transit time with resistive load 5) Reference voltage 50 V DC Limit values: operation in short-circuit protected network max. 8 A
Ambient data
Ambient temperature:Operation: -10 ... 55 C
Storage: -25 ... 75 C
Shock load:according to IEC 60068


Hot Products
Reviews(0)
Write a Review

Level:
 
Name:  
Reviews: