Sick LUT3-951 (1019288)- A&S Automation Co., Ltd

Add To Cart

Luminescense Scanner LUT3-951 NPN,PNP switching output, scanning distance 50 mm off-delay, analogue output plug M 12, 5pin filter og570

Features
Dimensions (L x W x H):	80 mm x 30.4 mm x 53 mm
Sensing distance ¹⁾:	50 mm
Light source ²⁾ ³⁾:	UV-LED
Light spot size:	5 mm x 15 mm
Receiving filters:	OG 570
Receiving range:	570 nm ... 750 nm
Adjustment:	Manual (potentiometer)
Switching mode:	Light switching
¹⁾ From front edge of lens ²⁾ Average service life of 100,000 h at T_A = +25 C ³⁾ Wave length: 375 nm
Mechanics/electronics
Supply voltage Vs:	DC 12 V ... 30 V
Residual ripple ¹⁾:	< 2 Vpp
Power consumption ²⁾:	< 60 mA
Switching frequency ³⁾:	1.5 kHz
Response time ⁴⁾:	350 s
Switching output:	PNP: HIGH = VS-≤3 V / LOW = approx. 0 V NPN: HIGH = approx.VS/ LOW ≤ 2 V
Switching output:	PNP/NPN
Output current Imax.:	100 mA
Electrical connection:	Connector M12, 5-pin
Protection class ⁵⁾:	II
Circuit protection:	Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected
Enclosure rating:	IP 67
Weight:	Ca. 400 g
Housing material:	Die-cast zinc
¹⁾ May not exceed or fall short of V_S tolerances ²⁾ Without load ³⁾ With light/dark ratio 1:1 ⁴⁾ Signal transit time with resistive load ⁵⁾ Reference voltage 50 V DC Limit values: operation in short-circuit protected network max. 8 A
Ambient data
Ambient temperature:	Operation: -10 ... 55 C Storage: -25 ... 75 C
Shock load:	according to IEC 60068

Hot Products

Reviews(0)

Write a Review

Hot Products