OPTEX Fiber Sensors D2RF Series- A&S Automation Co., Ltd

Home / Sensors / OPTEX-FA Sensor / OPTEX Fiber Sensors / OPTEX Fiber Sensors D2RF Series

Add To Cart

OPTEX Fiber Sensors D2RF Series

Features:

?Digital Fiber Amplifier with Two Independent Outputs.

?High speed 60 micro second response.

?SAM Circuit - The ASC function(Auto Sensitivity Control)

Applications:

NF-TY02 can be used for detecting bottle in chemical environment. Full power teaching helps easy setup of D2RF.

Set up of D2RF is done very easily by "One point teaching" utilizing diffuse type fiber NF-DT01 to detect and count electronic components.

Set up of D2RF is done very easily by "Two point teaching" utilizing diffuse type fiber NF-DK06 to detect PC Board.

Stable detection of the mark on the sheet is available with D2GF series utilizing diffuse type fiber cable.

Model

Standard

Mark sensor

Analogue

Stand-alone Type

IP50 type

Cable type NPN / PNP

D2RF-TN / TP

D2GF-TN / TP

D2RF-TAN / TAP

M8 QD 4pin, NPN / PNP

D2RF-TCN4 / TCP4

D2GF-TCN4 / TCP4

NA

IP66 type

Cable type NPN / PNP

D2RF-2TN / 2TP

D2GF-2TN / 2TP

D2RF-2TAN / 2TAP

M8 QD 4pin, NPN / PNP

D2RF-2TCN4 / 2TCP4

D2GF-2TCN4 / 2TCP4

NA

M8 QD 3pin, NPN / PNP

D2RF-2TCN3 / 2TCP3

D2GF-2TCN3 / 2TCP3

NA

Interconnection Type

Master unit

Cable type NPN / PNP

D2RF-TMN / TMP

D2GF-TMN / TMP

NA

M8 QD 4pin, NPN / PNP

D2RF-TMCN4 / TMCP4

D2GF-TMCN4 / TMCP4

NA

Slave unit

Cable type NPN / PNP

D2RF-TSN / TSP

D2GF-TSN / TSP

NA

M8 QD 4pin, NPN / PNP

D2RF-TSCN4 / TSCP4

D2GF-TSCN4 / TSCP4

NA

Light source

Red LED

Green LED

Red LED

Response time

60 micro sec (Fast mode ), 250 micro sec (standard), 2.0 ms (Long distance)

Auto control system

APC / ASC

LED Power control

3 steps ; 100%, 50% and 25%

Timer functions

On delay/Off delay /One shot, 1-9,999msec (1msec increment)

Sensitivity adjustment

Teach-in + fine adjustment

Output indicator

Output (orange) : 1CH / 2CH common

Output (orange)

Digital indicator

7 segment LED, 4 digits in Red, 4 digits in Green

Teach-in mode

Full Power / One point / Two points / Full Automatic / Differential / Zone / Transparent

Control output

2CH, NPN or PNP open collector, DC30V, 100mA Max

1CH, NPN or PNP

Parallel installation

Up to 16 sets

Crosstalk prevention

Up to 4 sets

Operating mode

Light on / Dark on selectable

Sensing mode

Long Distance Mode, Standard, Fast mode,

Display

Regular dislay plus ; bar, %, eco (off, run mode only)

External input

Teaching / Counter Reset

Supply voltage

DC 10-24V +/- 10% ripple

Power consumption

45mA Max (24V)

Circuit protection

Reverse Polarity, Overcurrent, Short circuit

Warm-up time

100m sec

Operating temp / humidity

?25 to 55?, 35 to 85% RH

Storage temp / humidity

?40 to 70?, 35 to 85% RH

Environmental illuminance

Sunlight 10,000 lux, High Frequency Lamp 3,000 lux

Protection category

IEC, IP50 (except Stand-alone IP66 types)

Comformity

EC, CE

Shock resistance

IEC 68, 50G

Weight

Cable type 21g, M8 connector type 23g

Factory default settings

Response time (Standard), Output (Light On), Timer (OFF), APC (OFF),

Model	Standard	Mark sensor	Analogue
IP50 type	Cable type NPN / PNP	D2RF-TN / TP	D2GF-TN / TP	D2RF-TAN / TAP
M8 QD 4pin, NPN / PNP	D2RF-TCN4 / TCP4	D2GF-TCN4 / TCP4	NA
IP66 type	Cable type NPN / PNP	D2RF-2TN / 2TP	D2GF-2TN / 2TP	D2RF-2TAN / 2TAP
M8 QD 4pin, NPN / PNP	D2RF-2TCN4 / 2TCP4	D2GF-2TCN4 / 2TCP4	NA
M8 QD 3pin, NPN / PNP	D2RF-2TCN3 / 2TCP3	D2GF-2TCN3 / 2TCP3	NA
Interconnection Type
Master unit	Cable type NPN / PNP	D2RF-TMN / TMP	D2GF-TMN / TMP	NA
M8 QD 4pin, NPN / PNP	D2RF-TMCN4 / TMCP4	D2GF-TMCN4 / TMCP4	NA
Slave unit	Cable type NPN / PNP	D2RF-TSN / TSP	D2GF-TSN / TSP	NA
M8 QD 4pin, NPN / PNP	D2RF-TSCN4 / TSCP4	D2GF-TSCN4 / TSCP4	NA
Light source	Red LED	Green LED	Red LED
Response time	60 micro sec (Fast mode ), 250 micro sec (standard), 2.0 ms (Long distance)
Auto control system	APC / ASC
LED Power control	3 steps ; 100%, 50% and 25%
Timer functions	On delay/Off delay /One shot, 1-9,999msec (1msec increment)
Sensitivity adjustment	Teach-in + fine adjustment
Output indicator	Output (orange) : 1CH / 2CH common	Output (orange)
Digital indicator	7 segment LED, 4 digits in Red, 4 digits in Green
Teach-in mode	Full Power / One point / Two points / Full Automatic / Differential / Zone / Transparent
Control output	2CH, NPN or PNP open collector, DC30V, 100mA Max	1CH, NPN or PNP
Parallel installation	Up to 16 sets
Crosstalk prevention	Up to 4 sets
Operating mode	Light on / Dark on selectable
Sensing mode	Long Distance Mode, Standard, Fast mode,
Display	Regular dislay plus ; bar, %, eco (off, run mode only)
External input	Teaching / Counter Reset
Supply voltage	DC 10-24V +/- 10% ripple
Power consumption	45mA Max (24V)
Circuit protection	Reverse Polarity, Overcurrent, Short circuit
Warm-up time	100m sec
Operating temp / humidity	?25 to 55?, 35 to 85% RH
Storage temp / humidity	?40 to 70?, 35 to 85% RH
Environmental illuminance	Sunlight 10,000 lux, High Frequency Lamp 3,000 lux
Protection category	IEC, IP50 (except Stand-alone IP66 types)
Comformity	EC, CE
Shock resistance	IEC 68, 50G
Weight	Cable type 21g, M8 connector type 23g
Factory default settings	Response time (Standard), Output (Light On), Timer (OFF), APC (OFF),

Hot Products

Reviews(0)

Write a Review

OPTEX Fiber Sensors BIF Series

Add To Cart
OPTEX Fiber Sensors BRF Series

Add To Cart
OPTEX Fiber Sensors D2RF Series

Add To Cart
OPTEX Fiber Sensors D3RF Series

Add To Cart
OPTEX Fiber Sensors NF Series

Add To Cart
OPTEX Fiber Sensors NF02/NF25 Series

Add To Cart

Hot Products

ABB Focus ll light curtain/grid, Type 4 (FII-4) FII-4-K2C-1200/

Add To Cart
Keyence FS-V11 Amplifier

Add To Cart
Keyence FU Series Fiber Optic Sensors FU-31

Add To Cart
KEYENCE VHX-500F Series

Add To Cart
Omron E2E Series

Add To Cart
Panasonic High Capacity DC Power Relays AEJ

Add To Cart
Panasonic High Capacity DC Power Relays AEP

Add To Cart
Panasonic Non-Polarized Power Relays PQ

Add To Cart
Pepperl+Fuchs Cable pull SL3001-X2/GS80

Add To Cart
Pepperl+Fuchs Incremental rotary encoder RVI50N-09B**A*6

Add To Cart
Rectilinear displacement sensor with magnetic drag

Add To Cart
Alphasense Nh3 Gas Sensor Ammonia Sensor Nh3-A1 (NH3-A1 )

Add To Cart
IFM Electronic Pressure Sensor catalogue

Add To Cart
Bosch Oxygen Sensor 0 258 005 703

Add To Cart
Oxygen Sensor 0 281 004 044 For HYUNDAI Elantra Goupe

Add To Cart

Model		Standard	Mark sensor	Analogue
Stand-alone Type
IP50 type	Cable type NPN / PNP	D2RF-TN / TP	D2GF-TN / TP	D2RF-TAN / TAP
IP50 type	M8 QD 4pin, NPN / PNP	D2RF-TCN4 / TCP4	D2GF-TCN4 / TCP4	NA
IP66 type	Cable type NPN / PNP	D2RF-2TN / 2TP	D2GF-2TN / 2TP	D2RF-2TAN / 2TAP
	M8 QD 4pin, NPN / PNP	D2RF-2TCN4 / 2TCP4	D2GF-2TCN4 / 2TCP4	NA
	M8 QD 3pin, NPN / PNP	D2RF-2TCN3 / 2TCP3	D2GF-2TCN3 / 2TCP3	NA
Interconnection Type
Master unit	Cable type NPN / PNP	D2RF-TMN / TMP	D2GF-TMN / TMP	NA
Master unit	M8 QD 4pin, NPN / PNP	D2RF-TMCN4 / TMCP4	D2GF-TMCN4 / TMCP4	NA
Slave unit	Cable type NPN / PNP	D2RF-TSN / TSP	D2GF-TSN / TSP	NA
Slave unit	M8 QD 4pin, NPN / PNP	D2RF-TSCN4 / TSCP4	D2GF-TSCN4 / TSCP4	NA
Light source		Red LED	Green LED	Red LED
Response time		60 micro sec (Fast mode ), 250 micro sec (standard), 2.0 ms (Long distance)
Auto control system		APC / ASC
LED Power control		3 steps ; 100%, 50% and 25%
Timer functions		On delay/Off delay /One shot, 1-9,999msec (1msec increment)
Sensitivity adjustment		Teach-in + fine adjustment
Output indicator		Output (orange) : 1CH / 2CH common		Output (orange)
Digital indicator		7 segment LED, 4 digits in Red, 4 digits in Green
Teach-in mode		Full Power / One point / Two points / Full Automatic / Differential / Zone / Transparent
Control output		2CH, NPN or PNP open collector, DC30V, 100mA Max		1CH, NPN or PNP
Parallel installation		Up to 16 sets
Crosstalk prevention		Up to 4 sets
Operating mode		Light on / Dark on selectable
Sensing mode		Long Distance Mode, Standard, Fast mode,
Display		Regular dislay plus ; bar, %, eco (off, run mode only)
External input		Teaching / Counter Reset
Supply voltage		DC 10-24V +/- 10% ripple
Power consumption		45mA Max (24V)
Circuit protection		Reverse Polarity, Overcurrent, Short circuit
Warm-up time		100m sec
Operating temp / humidity		?25 to 55?, 35 to 85% RH
Storage temp / humidity		?40 to 70?, 35 to 85% RH
Environmental illuminance		Sunlight 10,000 lux, High Frequency Lamp 3,000 lux
Protection category		IEC, IP50 (except Stand-alone IP66 types)
Comformity		EC, CE
Shock resistance		IEC 68, 50G
Weight		Cable type 21g, M8 connector type 23g
Factory default settings		Response time (Standard), Output (Light On), Timer (OFF), APC (OFF),

Level:
Name:
Reviews: