OPTEX Fiber Sensors D3RF Series- A&S Automation Co., Ltd

Home / Sensors / OPTEX-FA Sensor / OPTEX Fiber Sensors / OPTEX Fiber Sensors D3RF Series

Add To Cart

OPTEX Fiber Sensors D3RF Series

Features:

?Digital Fiber Sensor with two wide displays.

?Higher performance and higher cost efficiency than conventional D2RF.

?High speed 16 micro second response.

Type

Standard type

IR type

Cable type

1 output type

D3RF-T(N/P)

D3IF-T(N/P)

2 output type

D3RF-TD(N/P)

-

M8 QD 4pin type

1 output type

D3RF-TC(N/P)4

D3IF-TC(N/P)4

2 output type

-

-

Supply voltage

12~24VDC +/- 10% including ripple

Power consumption

Standard mode

1 output:864mW max.(36mA max./24VDC), 2 output:936mW max.(39mA max./24VDC)

Eco all mode

1 output: 600mW max.(25mA max./24VDC), 2 output: 672mW max.(28mA max./24VDC)

Light Source

Red LED (632nm)

IR LED (1,450nm)

Response Time

1-HS: 16 ?s/ 2-FS: 70 ?s/ 3-ST: 250 ?s/ 4-LG: 500 ?s/ 5-PL: 1ms/ 6-UL: 2ms/ 7-EL: 8ms

Control Output

NPN or PNP open collector, DC30V max., 100mA max. (residual voltage: 1.8V max.)

Output Mode

Light ON / Dark ON selectable by setup

Indicator

Output indicator: Orange LED for output 1 and/or output 2

Digital display

7 segment LED, 4 digits in Red, 4 digits in Green

Timer Function

ON delay/OFF delay /One shot, 0.1ms-9,999msec

Sensitivity Adjustment

Teaching, Manual adjustment

External Input

Teach-in, Emitter stop, Synchronous, Counter reset (only for 2 output type)

Operating Temp./Humidity

-25 to 55/ 35 to 85% RH (No freezing and No condensation)

Storage Temp./Humidity

-30 to 70/ 35 to 85% RH (No freezing and No condensation)

Shock resistance

10~55Hz Amplitude 1.5mm 2 hours for each direction X,Y and Z

Protection Category

IP50

Material

PC (Cover, Case)

Weight

Cable type: 71g (including cable), Connector type: 25g

Type	Standard type	IR type
Cable type	1 output type	D3RF-T(N/P)	D3IF-T(N/P)
2 output type	D3RF-TD(N/P)	-
M8 QD 4pin type	1 output type	D3RF-TC(N/P)4	D3IF-TC(N/P)4
2 output type	-	-
Supply voltage	12~24VDC +/- 10% including ripple
Power consumption	Standard mode	1 output:864mW max.(36mA max./24VDC), 2 output:936mW max.(39mA max./24VDC)
Eco all mode	1 output: 600mW max.(25mA max./24VDC), 2 output: 672mW max.(28mA max./24VDC)
Light Source	Red LED (632nm)	IR LED (1,450nm)
Response Time	1-HS: 16 ?s/ 2-FS: 70 ?s/ 3-ST: 250 ?s/ 4-LG: 500 ?s/ 5-PL: 1ms/ 6-UL: 2ms/ 7-EL: 8ms
Control Output	NPN or PNP open collector, DC30V max., 100mA max. (residual voltage: 1.8V max.)
Output Mode	Light ON / Dark ON selectable by setup
Indicator	Output indicator: Orange LED for output 1 and/or output 2
Digital display	7 segment LED, 4 digits in Red, 4 digits in Green
Timer Function	ON delay/OFF delay /One shot, 0.1ms-9,999msec
Sensitivity Adjustment	Teaching, Manual adjustment
External Input	Teach-in, Emitter stop, Synchronous, Counter reset (only for 2 output type)
Operating Temp./Humidity	-25 to 55/ 35 to 85% RH (No freezing and No condensation)
Storage Temp./Humidity	-30 to 70/ 35 to 85% RH (No freezing and No condensation)
Shock resistance	10~55Hz Amplitude 1.5mm 2 hours for each direction X,Y and Z
Protection Category	IP50
Material	PC (Cover, Case)
Weight	Cable type: 71g (including cable), Connector type: 25g

Interconnection type

Type		Master type	Slave type
Cable type	1 output type	D3RF-TM(N/P)	D3IF-TS(N/P)
Cable type	2 output type	D3RF-TDM(N/P)	D3RF-TDS(N/P)
M8 QD 4pin type	1 output type	D3RF-TMC(N/P)4	D3IF-TSC(N/P)4
M8 QD 4pin type	2 output type	-	-
Supply voltage		12~24VDC +/- 10% including ripple
Power consumption	Standard mode	1 output: 864mW max.(36mA max./24VDC), 2 output: 936mW max.(39mA max./24VDC)
Power consumption	Eco all mode	1 output: 600mW max.(25mA max./24VDC), 2 output: 672mW max.(28mA max./24VDC)
Light Source		Red LED (632nm)
Response Time		1-HS: 16 ?s(no interconnection), 22 ?s(interconnection)/ 2-FS: 70 ?s, 85 ?s(interconnection)/ 3-ST: 250 ?s/ 4-LG: 500 ?s/ 5-PL: 1ms/ 6-UL: 2ms/ 7-EL: 8ms
Control Output		NPN or PNP open collector, DC30V max., 100mA max. (residual voltage: 1.8V max.)
Output Mode		Light ON / Dark ON selectable by setup
Indicator		Output indicator: Orange LED for output 1 and/or output 2
Digital display		7 segment LED, 4 digits in Red, 4 digits in Green
Timer Function		ON delay/OFF delay /One shot, 0.1ms-9,999msec
Sensitivity Adjustment		Teaching, Manual adjustment
External Input		Teach-in, Emitter stop, Synchronous, Counter reset (only for 2 output type)
Number of cross talk prevention		1-HS: 2 units/ 2-FS, 3-ST: 4 units/ 4-LG, 5-PL: 8 units/ 6-UL, 7-EL: 12 units
Operating Temp./Humidity		-25 to 55/ 35 to 85% RH (Up to 3 units interconnected **, No freezing and No condensation)
Storage Temp./Humidity		-30 to 70/ 35 to 85% RH (No freezing and No condensation)
Shock resistance		10~55Hz Amplitude 1.5mm 2 hours for each direction X,Y and Z
Protection Category		IP50
Material		PC (Cover, Case)
Weight		Cable type: 71g (including cable), Connector type: 25g

Hot Products

Reviews(0)

Write a Review

OPTEX Fiber Sensors BIF Series

Add To Cart
OPTEX Fiber Sensors BRF Series

Add To Cart
OPTEX Fiber Sensors D2RF Series

Add To Cart
OPTEX Fiber Sensors D3RF Series

Add To Cart
OPTEX Fiber Sensors NF Series

Add To Cart
OPTEX Fiber Sensors NF02/NF25 Series

Add To Cart

Hot Products

ABB Focus ll light curtain/grid, Type 4 (FII-4) FII-4-K2C-1200/

Add To Cart
Keyence FS-V11 Amplifier

Add To Cart
Keyence FU Series Fiber Optic Sensors FU-31

Add To Cart
KEYENCE VHX-500F Series

Add To Cart
Omron E2E Series

Add To Cart
Panasonic High Capacity DC Power Relays AEJ

Add To Cart
Panasonic High Capacity DC Power Relays AEP

Add To Cart
Panasonic Non-Polarized Power Relays PQ

Add To Cart
Pepperl+Fuchs Cable pull SL3001-X2/GS80

Add To Cart
Pepperl+Fuchs Incremental rotary encoder RVI50N-09B**A*6

Add To Cart
Rectilinear displacement sensor with magnetic drag

Add To Cart
Alphasense Nh3 Gas Sensor Ammonia Sensor Nh3-A1 (NH3-A1 )

Add To Cart
IFM Electronic Pressure Sensor catalogue

Add To Cart
Bosch Oxygen Sensor 0 258 005 703

Add To Cart
Oxygen Sensor 0 281 004 044 For HYUNDAI Elantra Goupe

Add To Cart

Level:
Name:
Reviews: