OPTEX Displacement Sensors CD3 Series- A&S Automation Co., Ltd

Home / Sensors / OPTEX-FA Sensor / OPTEX Displacement Sensors / OPTEX Displacement Sensors CD3 Series

Add To Cart

OPTEX Displacement Sensors CD3 Series

Features:

?CMOS Image Sensor for high accuracy displacement measurement.

?Span adjustment and Offset functions for?flexible control of analogue output.

?Preset alarm for Peak/Bottom limit of analogue value.

?Accurate detection of dark colored targets.

Applications:

Checking warpage of Printed Circuit Board is available using multiple CD3 comparing outputs from those CD3 sensors.

Checking position of the actuator on HDD assembly is available by CD3.

Measurement thickness of products on the conveyor is possible easily.

Inspection of inside diameter of gears is available.

Stable measurement of thickness of rubber sheet on the roller is available.

CD3 Series, CMOS Image Laser Displacement Sensor

Cable

CD3-30N/P

CD3-50N/P

CD3-80N/P

CD3-100N/P

CD3-250N/P

M12 Connector

CD3-30CN/CP

CD3-50CN/CP

CD3-80CN/CP

CD3-100CN/CP

CD3-250CN/CP

Transistor output

N = NPN output, P = PNP output

Measuring range

30+/-4mm

50 +/- 10mm

80 +/- 15mm

100 +/- 40mm

250 +/- 150mm

FS ?full scale?

Class 2 Laser, 650nm, Max 1mW

Light source

Class 2 Laser, 650nm, Max 1mW

Min spot size

?@0.5 mm

?@0.8 mm

1 X 1.5mm

1 X 1.5mm

3 X 1.5mm

Supply voltage

12 - 24V DC ??5 to ?10%?

Sensitivity adjustment

Nominal value 1-20, or AUTO

Power consumption

Max 120mA ?DC12V?, 80mA ?DC24V?, including analog output current

Resolution?typical value?

?Unit : Micron. Under AUTO sensitivity. White ceramic as an object?

?Averaging 64: default value?

4

10

10

30

150

?Averaging 1?

12

30

40

80

2mm

?Averaging 4?

8

20

30

60

800

?Averaging 16?

6

12

20

40

400

?Averaging 256?

2

8

8

20

100

?Averaging 1024?

below 2

below 8

below 8

below 10

50

Linearity

+/- 1% FS

+/- 1.5%FS ?up to 250mm?

+/- 2.5%FS ?up to 400mm?

Temp drift

+/- 0.08% FS / Celsius

Response time

Max 2.2ms ?at fixed sensitivity between 1-20 ?,Max 15ms ?at Auto sensitivity?

Sampling rate

500 s

Analogue output

4-20 mA

Control output

NPN or PNP, Max 100mA/DC24V, Residual Voltage Max 1.8V

Timer

On delay / Off delay / Oneshot ?1msec increment for 0-999ms, 1sec for 0-10 sec?

Distance indicator

Red = Near, Orange = Middle, Green = Far, Red/Green = Error *Remark : Errors as "out of measuring range", "Too high reflection", etc

Stability indicator

Green = Stable, Red = Error, No light = Unstable, need adjustment

Control output indicator

Orange = Output ?NPN or PNP)

Environmental illuminance

Sun light : Max 10,000 lux, Incandescent Lamp = Max 3,000 lux

Operating temp / humidity

?10 to 40 oC,35 to 95% RH

Insulation resistance

20 M? / DC 500V

Material

Zinc diecast

Protection category

IP67

Conformity

CE

Warm-up time

30 minutes

CD3 Series, CMOS Image Laser Displacement Sensor
Transistor output	N = NPN output, P = PNP output
Measuring range	30+/-4mm	50 +/- 10mm	80 +/- 15mm	100 +/- 40mm	250 +/- 150mm
FS ?full scale?	Class 2 Laser, 650nm, Max 1mW
Light source	Class 2 Laser, 650nm, Max 1mW
Min spot size	?@0.5 mm	?@0.8 mm	1 X 1.5mm	1 X 1.5mm	3 X 1.5mm
Supply voltage	12 - 24V DC ??5 to ?10%?
Sensitivity adjustment	Nominal value 1-20, or AUTO
Power consumption	Max 120mA ?DC12V?, 80mA ?DC24V?, including analog output current
Resolution?typical value?	?Unit : Micron. Under AUTO sensitivity. White ceramic as an object?
?Averaging 64: default value?	4	10	10	30	150
?Averaging 1?	12	30	40	80	2mm
?Averaging 4?	8	20	30	60	800
?Averaging 16?	6	12	20	40	400
?Averaging 256?	2	8	8	20	100
?Averaging 1024?	below 2	below 8	below 8	below 10	50
Linearity	+/- 1% FS	+/- 1.5%FS ?up to 250mm? +/- 2.5%FS ?up to 400mm?
Temp drift	+/- 0.08% FS / Celsius
Response time	Max 2.2ms ?at fixed sensitivity between 1-20 ?,Max 15ms ?at Auto sensitivity?
Sampling rate	500 s
Analogue output	4-20 mA
Control output	NPN or PNP, Max 100mA/DC24V, Residual Voltage Max 1.8V
Timer	On delay / Off delay / Oneshot ?1msec increment for 0-999ms, 1sec for 0-10 sec?
Distance indicator	Red = Near, Orange = Middle, Green = Far, Red/Green = Error *Remark : Errors as "out of measuring range", "Too high reflection", etc
Stability indicator	Green = Stable, Red = Error, No light = Unstable, need adjustment
Control output indicator	Orange = Output ?NPN or PNP)
Environmental illuminance	Sun light : Max 10,000 lux, Incandescent Lamp = Max 3,000 lux
Operating temp / humidity	?10 to 40 oC,35 to 95% RH
Insulation resistance	20 M? / DC 500V
Material	Zinc diecast
Protection category	IP67
Conformity	CE
Warm-up time	30 minutes

Hot Products

Reviews(0)

Write a Review

OPTEX Displacement Sensors CD1 Series

Add To Cart
OPTEX Displacement Sensors CD3 Series

Add To Cart
OPTEX Displacement Sensors CD33 Series

Add To Cart
OPTEX Displacement Sensors CD4 Series

Add To Cart
OPTEX Displacement Sensors CD4L-25 Series

Add To Cart
OPTEX Displacement Sensors CD5 Series

Add To Cart

Hot Products

ABB Focus ll light curtain/grid, Type 4 (FII-4) FII-4-K2C-1200/

Add To Cart
Keyence FS-V11 Amplifier

Add To Cart
Keyence FU Series Fiber Optic Sensors FU-31

Add To Cart
KEYENCE VHX-500F Series

Add To Cart
Omron E2E Series

Add To Cart
Panasonic High Capacity DC Power Relays AEJ

Add To Cart
Panasonic High Capacity DC Power Relays AEP

Add To Cart
Panasonic Non-Polarized Power Relays PQ

Add To Cart
Pepperl+Fuchs Cable pull SL3001-X2/GS80

Add To Cart
Pepperl+Fuchs Incremental rotary encoder RVI50N-09B**A*6

Add To Cart
Rectilinear displacement sensor with magnetic drag

Add To Cart
Alphasense Nh3 Gas Sensor Ammonia Sensor Nh3-A1 (NH3-A1 )

Add To Cart
IFM Electronic Pressure Sensor catalogue

Add To Cart
Bosch Oxygen Sensor 0 258 005 703

Add To Cart
Oxygen Sensor 0 281 004 044 For HYUNDAI Elantra Goupe

Add To Cart

CD3 Series, CMOS Image Laser Displacement Sensor
Cable	CD3-30N/P	CD3-50N/P	CD3-80N/P	CD3-100N/P	CD3-250N/P
M12 Connector	CD3-30CN/CP	CD3-50CN/CP	CD3-80CN/CP	CD3-100CN/CP	CD3-250CN/CP
Transistor output	N = NPN output, P = PNP output
Measuring range	30+/-4mm	50 +/- 10mm	80 +/- 15mm	100 +/- 40mm	250 +/- 150mm
FS ?full scale?	Class 2 Laser, 650nm, Max 1mW
Light source	Class 2 Laser, 650nm, Max 1mW
Min spot size	?@0.5 mm	?@0.8 mm	1 X 1.5mm	1 X 1.5mm	3 X 1.5mm
Supply voltage	12 - 24V DC ??5 to ?10%?
Sensitivity adjustment	Nominal value 1-20, or AUTO
Power consumption	Max 120mA ?DC12V?, 80mA ?DC24V?, including analog output current
Resolution?typical value?	?Unit : Micron. Under AUTO sensitivity. White ceramic as an object?
?Averaging 64: default value?	4	10	10	30	150
?Averaging 1?	12	30	40	80	2mm
?Averaging 4?	8	20	30	60	800
?Averaging 16?	6	12	20	40	400
?Averaging 256?	2	8	8	20	100
?Averaging 1024?	below 2	below 8	below 8	below 10	50
Linearity	+/- 1% FS				+/- 1.5%FS ?up to 250mm? +/- 2.5%FS ?up to 400mm?
Temp drift	+/- 0.08% FS / Celsius
Response time	Max 2.2ms ?at fixed sensitivity between 1-20 ?,Max 15ms ?at Auto sensitivity?
Sampling rate	500 s
Analogue output	4-20 mA
Control output	NPN or PNP, Max 100mA/DC24V, Residual Voltage Max 1.8V
Timer	On delay / Off delay / Oneshot ?1msec increment for 0-999ms, 1sec for 0-10 sec?
Distance indicator	Red = Near, Orange = Middle, Green = Far, Red/Green = Error *Remark : Errors as "out of measuring range", "Too high reflection", etc
Stability indicator	Green = Stable, Red = Error, No light = Unstable, need adjustment
Control output indicator	Orange = Output ?NPN or PNP)
Environmental illuminance	Sun light : Max 10,000 lux, Incandescent Lamp = Max 3,000 lux
Operating temp / humidity	?10 to 40 oC,35 to 95% RH
Insulation resistance	20 M? / DC 500V
Material	Zinc diecast
Protection category	IP67
Conformity	CE
Warm-up time	30 minutes

Level:
Name:
Reviews: