OPTEX Displacement Sensors CD4L-25 Series- A&S Automation Co., Ltd

Home / Sensors / OPTEX-FA Sensor / OPTEX Displacement Sensors / OPTEX Displacement Sensors CD4L-25 Series

Add To Cart

OPTEX Displacement Sensors CD4L-25 Series

Features:

Laser Displacement sensor features easy setup and operation.

High accuracy of 0.1 m resolution and +/- 0.1% linearity. (Specular Type)

Specular type optics that is ideal for glass sensing.

Applications:

Checking warpage of the glass plate is available by CD4-L25.

Checking presence of glass plate on the pickup arm is available by CD4-L25.

Checking mirror surface by CD4-L25, specular reflective type sensor head.

Checking glass plate running on the conveyor is available by CD4-L25.

Model

CD4-L25

Measuring range

25+/-1mm

Light source

Class 1 (IEC/JIS) Class II (FDA) Laser, 650nm, Max 390 Micro W)

Spot size(*1)

25 35 m

Linearity(*2)

0.1% FS

Resolution(*3)

0.1 m

Supply voltage

supplied by CD4A-LN/LP Controller

Temp drift

0.01% FS/ C,F

Laser emission LED

Green = Laser emission

Measurement LED

Red = In range, closer than center 5% of measurement range (0 to 45%)

Orange = Within +/- 5% of the center of the measuring range

Green = In range, farther than center 5% of measurement range (55 to 100%)

Red/Green alternating = Out of measuring range

Protection category

IP67

Operation temp / humidity

?10 to 45 ? (14 to 113 Fo), 35 to 85% RH

Storage temp / humidity

?20 to 60 ? (?4 to 140 Fo), 35 to 85% RH

Environmental illuminance

Incandescent Lamp = Max 3,000 lux

Vibration resistance

10 to 55 Hz double amplitude 1.5mm for XYZ

Shock resistance

50G (050m/s)

Cable

50cm (19.7 inch) cable

Cable extension

CD4CN-S-ROBOT (2m, 78 inch), CD4CN-5S-ROBOT (5m, 197 inch)

Material

Aluminum diecast

Model	CD4-L25
Measuring range	25+/-1mm
Light source	Class 1 (IEC/JIS) Class II (FDA) Laser, 650nm, Max 390 Micro W)
Spot size(*1)	25 35 m
Linearity(*2)	0.1% FS
Resolution(*3)	0.1 m
Supply voltage	supplied by CD4A-LN/LP Controller
Temp drift	0.01% FS/ C,F
Laser emission LED	Green = Laser emission
Measurement LED	Red = In range, closer than center 5% of measurement range (0 to 45%) Orange = Within +/- 5% of the center of the measuring range Green = In range, farther than center 5% of measurement range (55 to 100%) Red/Green alternating = Out of measuring range
Protection category	IP67
Operation temp / humidity	?10 to 45 ? (14 to 113 Fo), 35 to 85% RH
Storage temp / humidity	?20 to 60 ? (?4 to 140 Fo), 35 to 85% RH
Environmental illuminance	Incandescent Lamp = Max 3,000 lux
Vibration resistance	10 to 55 Hz double amplitude 1.5mm for XYZ
Shock resistance	50G (050m/s)
Cable	50cm (19.7 inch) cable
Cable extension	CD4CN-S-ROBOT (2m, 78 inch), CD4CN-5S-ROBOT (5m, 197 inch)
Material	Aluminum diecast

*1 Defined with center strength 1/e2 (13.5%). There may be leak light other than the spot size.

*2 The sensor may be affected when there is a highly reflective object close to the detection area.

*3 256 times in average (using the special amplifier), object: White Ceramic. The value is subject to objects.

The typical value in the conditions of 256 times in average (using the special amplifier), object: White Ceramic, distance range: Middle.

The value is subject to objects.

Model		CD4A-LN (NPN output type)	CD4A-LP (PNP output type)
Number of connected sensor heads		Max. 2 pcs
Sampling frequency		100 s
Supply voltage		12 to 24V, DC 10%
Power consumption		270 mA/24 V (When connected with 2 sensor heads. Including analog current output)
Temp drift		0.01 % F.S./?
Analog output	ANG (V) [A][B]	Voltage output 5 V/F.S. (Output impedance 100?, resolution 1 mV)
Analog output	ANG(mA) [A][B]	Current output 4 to 20 mA/F.S. (Load impedance 300?, resolution 1.5A)
Alarm output	ALM A,ALM B	NPN open collector	PNP open collector
Alarm output	ALM A,ALM B	Max. 100mA / DC 24V (residual voltage Max. 1.8 V)
Control output	JDGE 1 to 5	Turns ON when the sensor head fails in measurement.
		NPN open collector	PNP open collector
		Max. 100mA / DC 24V (residual voltage Max. 1.8 V)
		HI/LO setting and Hysteresis setting are available for each output.
Bank input	BANK 0 to 2	ON when connected to GND	ON when connected to 12 to 24 V
Bank input	BANK 0 to 2	8 banks selectable
Hold input	HOLD A, HOLD B, HOLD RST	ON when connected to GND	ON when connected to 12 to 24 V
Hold input	HOLD A, HOLD B, HOLD RST	Laser off or measurement value holding (selectable in the menu)
Zero reset input	ZERO A, ZERO B	ON when connected to GND	ON when connected to 12 to 24 V
Zero reset input	ZERO A, ZERO B	Zero reset of Head A measurement value / Head B measurement value / Calculation value is available.
Optional features		Average sampling times, Filter mode (Cut-off frequency), Calculation, Hold setting, Output during alarm, Output control (Hysteresis), Analog output, Sensor head sensitivity control, Timer function, Memory function, Memory bank function, Auto zero reset
Display type		LCD display
Protection category		IP20
Operation temp		?10 to ?45? (Non-condensing) / For storage : ?20 to ?60?
Operating humidity		35 to 85% RH / For storage: 35 to 85 % RH
Vibration resistance		10 to 55 Hz, Double amplitude 1.5mm, 2 h for XYZ axis
Shock resistance		20G (196m/S)
Material		Chassis: Polycarbonate, Connection terminals: Nylon 66
Weight		240g (including connection terminals)

Hot Products

Reviews(0)

Write a Review

OPTEX Displacement Sensors CD1 Series

Add To Cart
OPTEX Displacement Sensors CD3 Series

Add To Cart
OPTEX Displacement Sensors CD33 Series

Add To Cart
OPTEX Displacement Sensors CD4 Series

Add To Cart
OPTEX Displacement Sensors CD4L-25 Series

Add To Cart
OPTEX Displacement Sensors CD5 Series

Add To Cart

Hot Products

ABB Focus ll light curtain/grid, Type 4 (FII-4) FII-4-K2C-1200/

Add To Cart
Keyence FS-V11 Amplifier

Add To Cart
Keyence FU Series Fiber Optic Sensors FU-31

Add To Cart
KEYENCE VHX-500F Series

Add To Cart
Omron E2E Series

Add To Cart
Panasonic High Capacity DC Power Relays AEJ

Add To Cart
Panasonic High Capacity DC Power Relays AEP

Add To Cart
Panasonic Non-Polarized Power Relays PQ

Add To Cart
Pepperl+Fuchs Cable pull SL3001-X2/GS80

Add To Cart
Pepperl+Fuchs Incremental rotary encoder RVI50N-09B**A*6

Add To Cart
Rectilinear displacement sensor with magnetic drag

Add To Cart
Alphasense Nh3 Gas Sensor Ammonia Sensor Nh3-A1 (NH3-A1 )

Add To Cart
IFM Electronic Pressure Sensor catalogue

Add To Cart
Bosch Oxygen Sensor 0 258 005 703

Add To Cart
Oxygen Sensor 0 281 004 044 For HYUNDAI Elantra Goupe

Add To Cart

Level:
Name:
Reviews: